Winlink Training with ICS-213 at Home

Saturday, February 17, 2018 from 1 pm to 2 pm Central

WCARES Winlink Training with ICS-213 Home Exercise II will take place on Saturday, February the 17th between 1pm and 2pm (after the next Chew & Chat). It will run one hour instead of two.

Like the first exercise, you’ll be able to participate from home or anywhere you can operate Winlink. The participants will use the ICS-213 form template in Winlink to answer skill-testing questions derived from the ARRL Ham Radio License Manual. The questions will be from the Technician question pool.

In the first exercise, the participants issued one ISC-213 General Message form and “Replied” to many. In this exercise, the participants will be issuing the ISC-213 General Message form.

Class/Modes:

All license classes can participate and don’t worry about your level of experience with Winlink.

You can use any Winlink mode available to your license class and equipment; You can operate using Telnet over the Internet, Packet on VHF/UHF or Winmor/Pactor over HF. You can find the latest Frequency Band Charts here: http://www.arrl.org/graphical-frequency-allocations

If you participated in the first WCARES Winlink Training with ICS-213 Home Exercise, I would like to encourage you by challenging yourself not to use Telnet and try to use either Packet on VHF/UHF or Winmor/Pactor over HF. If you do not have radio capabilities, please continue to use Telnet.

Winlink/RMS Express:

You will need Winlink installed. Please go to the bottom of the Winlink Training with ICS-213 at Home Exercise announcement, posted on Nov 6, 2017 for instructions. https://wcares.org/winlink-training-with-ics-213-at-home/

Point System:

This is not a contest. The point system was created to help show you how well you did. In this exercise, you can keep track on how well you did.

Participants who are using Packet or Winmor/Pactor will receive bonus points. This will be based on the honor system.

5 points for using Packet mode
7 points for using Winmor or Pactor mode

1 point for each completed ISC-213 Question Sequence

15 point for each Bonus Question

10 point for participating the exercise from 1pm to 2pm

Some tidbits-

You do not need to stay for the whole exercise. If you need to leave early, please notify Net Control.

We have Elmers to help you. You are welcome to do the exercise at the EOC.

Please remember, this exercise is about learning a skill set and about having fun doing it!

Thank you,

Janise, KK4HTA

PSC Classroom Event, Saturday 24^th of March, from 8 am till noon.

Dave, KI4PSR, will facilitate a “Go Box, Drop Kit radio equipment configuration session” at a classroom in the Public Safety Center.

If you are interested in attending, please e-mail dave@lostfrogs.com .

The principal focus is on putting together a portable radio kit for UHF/VHF voice and Winlink.

Participants will design and start creating basic, simple portable radio systems including UHF/VHF radios, TNC, computer interface cabling, power supply and/or battery.

Target participants:

• New hams to learn what a go box kit means and includes from a radio perspective.
• Hams with an assembled kit to test and verify (hams uncertain if it works).
• Hams needing suggestions and parts lists/venders of required equipment, programming.
•  Hams needing simple connections and adaptors made (Coax, power poles, DIN cables wiring).

Support offered:

• Information document with drawings and parts list to send out before the event so participants can order what they might need.
• Email support to answer questions and supply information prior to the event.
• Building assistance at the event, testing, programming, training.

Limitations:

•  For this initial event, the number of participants will be limited to no more than 20.

Participants need to be as prepared as they can be considering their experience…this must be a do it yourself event requiring participants active involvement to the extent of their ability

Needed:

• Volunteers with experience, equipment, and tools. Experienced builders to bring parts like speakers TNCs and cables for donation or sale.

Winter Field Day will be January 27 – 28, held on Vanderbilt’s Dyer Observatory grounds. In case of inclement weather the location will instead be outside the Williamson County Public Safety building in Franklin. There will be three stations running 24 hours: SSB, CW and Digital (PSK31). We’re even going to try to work a satellite! The event begins at 1 pm Saturday, January 27th and continues until 1 pm Sunday, January 28th.

If you’d like to participate, sign up using the links below.

SSB: https://docs.google.com/spreadsheets/d/1Wih-zEw1-Xh2YGlTXJtHk1lXZc_NP3n4dpb41u0whrY/edit?usp=sharing

CW: https://docs.google.com/spreadsheets/d/1WJoxsxk2Q8Z2n-UaqYw3qvcXUlam49yuLA9dBEbJecs/edit?usp=sharing

Digital: https://docs.google.com/spreadsheets/d/1GfFeel2FkxfindtKm1YFJKBv15qAyIjo2r7VuChOt4Q/edit?usp=sharing

Questions? Email Laura at n4clo@arrl.net

A group of Antenna Enthusiasts recently gathered at Brentwood’s Dyer Observatory to test out what is described as an “Antenna Folly Experiment” brought forward by none other than our own KI4PSR.

The PDF file is also available here.

Scientists at Hiroshima University, National Institute of Information and Communications Technology, have announced the development of a transmitter capable of moving over 100 Gigabits (0.01 Tarabit) per second within the 300GHz band (290 GHz to 315 GHz). To put this in perspective one could transmit the entire contents of a DVD in just a fraction of a second or transfer enough data to completely fill the average laptop hard drive in a few seconds.

This segment of the band is currently unallocated but expected to be the subject of discussion at the World Radiocommunication Conference (WRC) 2019 under the International Telecommunication Union Radiocommunication Section (ITU-R).

Read More via Panasonic.